Start Saving On Your Power Bills
with Powersensor!
Power prices have increased by over 100% Australia-wide*
Powersensor has helped thousands of Australians to save money on their power bills with and without solar.
Now, you can benefit from real-time energy usage insights and much more without costly site inspections and electrical upgrades.
*Canstar Blue, September 2022
Start saving in four easy steps
01.
Check Your Meter and Connection
Check have a digital meter, within 10 meters of your intended Powersensor plug position. As well as your connection, to ensure its single-phase.
02.
DIY Install your Powersensor
Purchase your Powersensor online. Once your Powersensor has arrived, follow the simple, in-app guided 15-minute DIY installation process. No need for electricians, site inspections, or power disruptions.
03.
Understand Your Energy Usage
Begin to monitor your home's energy consumption and identify energy usage patterns such as peak times and appliances with high energy loads, like air conditioning, lighting, washer and dryer.
04.
Make smarter energy choices
Start to make small steps to reduce your power bill, such as switching out an old appliance, running your high-load appliances on a timer, or pre-cooling or heating your home.
Ensure your energy bills are accurate from your energy retailer, in the case of an estimated meter.
Avoid bill shock and budget effectively! Understand your real-time usage rather than receiving an end-of-billing cycle bill.
Gain insights into your energy usage and whether you would benefit from a meter upgrade to enable solar or a battery.
Gain control over your energy future in a few simple ways
Thinking of going solar in the future?
Easily upgrade to our Essentials Solar Monitoring Solution, at no cost. Show me more!
The Solution
The Sensor
Our sensor detects usage from the meter box and sends this data to the cloud every 30 seconds to ensure you stay informed of your usage all the time.
The Plug
Our WiFi Plug acts as a gateway transmitting data directly from your appliances to provide real-time insights and control. As well as calibrating when a high-load appliance is connected to the plug.
The App
The Powersensor app shows your real-time and historical energy data and provides a step-by-step guide for easy installation.
Easy Install
Safely DIY install your Powersensor within 15 minutes.
This 2 minute video will show you how!
No tools, electricians and site inspections are required. No need to disrupt your energy supply or go near live wires.
Compatible with
Residences of All Types
Powersensor provides real-time data for homes, townhouses, some apartments, and small businesses—with a single-phase electrical connection. With a standalone digital meter box, within 10 meters of the Powersensor installed plug.
Almost Every Solar PV Setup
Retrofittable and easily installed with any inverter or solar setup, regardless of the brand or year of make. As long as there is a standalone digital meter box within 10 meters of the Powersensor installed plug.
A Fixed WiFI Connection
Powersensor is designed to connect to your WiFi, as WiFi has a greater range and can work with multiple devices. The Powersensor solution requires a secure 2.4GHz WiFi with internet connection, which is password protected.